|
UFO Propagation - by Paul E Potter
| ||
| ||
Aircraft such as those described by Bob Lazar and other experiencers will also be mentioned in a separate page (see Electrokinetic UFO page).
As the high intensity charges build up the more conductive metallic suspensoids in the insulating fluid move toward the inside of the sharp-pointed circumferential edges (by dielectrophoretic motion to where the field intensity in the liquid is at its highest) (see note 2) (also see Non-uniform Electric Fields page). The fluid’s composition should be such that it will create a polarized electric field; is insulating (so as to prevent current leakage between electric poles), and that it creates a magnetic field perpendicular to the flow of the fluid. Movement of the liquid can be produced in several ways; one of which involves a TT Brown concept using a simple rod as one electrode submerged in the liquid surrounded by a hollow conical electrode, and using the reaction of the fluid in the resultant non-uniform electric field (see his US patents 3,267,860 and 3,196,296). Present research into the electro-kinetic effects produced when an insulating fluid is subjected to an electric field is called electrohydrodynamics, and as an effect has been around a long time; indeed, Michael Faraday made note of it as a ‘violent motion’ back in the 1830’s. Set up within and around the toroid is a reaction known as the Lorentz
Force which intrinsically governs how the accumulating charges and
magnetic field lines interact with each other Toroid's Structure For the toroid and the upper shell of the ufo some metals used in their construction are similar to the metals found on earth, but the structuring process that the metals have gone through is wholly unconventional and involves some sort of electrical orientation of its molecules to enhance a 'directional' conductivity. The late Colonel Philip J. Corso (in his book "The Day After Roswell") alluded to US Army R&D research into the ET Tech of molecular alignment of metallic alloys. As did the scientific lab tests performed on the Roswell metals delivered to Art Bell (who used to host the US radio talk show Dreamland) in that they have 60 times more pos ion content ("Glimpses of Other Realities - Vol 2" Linda M. Howe p19) (see note 3). While electric charges cannot be conducted from the charge-accumulating fluid directly through the toroid walls and edges there will be a capacitive effect which will accumulate charges of an opposite polarity, on the outside surfaces which will correspond to the inner ones in intensity and location. This ‘diffuse layer’, as its called, of electric charge, occurs most effectively when the liquid is moving, and the faster the liquid moves the more pronounced will be the separation effect of its electric ions from the ions in the differently moving diffuse layer outside (see note 4). With this same respect the charges that accumulate outside in the space around the lower INNER edge of the toroid in its diffuse layer, that encircles the base disc assembly would be NEGATIVE. And the charges accumulating around the outside of the whole of the OUTER circumference of the toroid would be POSITIVE. So, below the craft there are two concentric donut-rings of electrical energy – inner negative, outer positive – separated by a neutral field of insulating air. While the process of charge accumulation continues inside the craft these two donut-rings or ‘dipolar electrodes’ get stronger and stronger, building up between them electrostatic field lines and a potential magnetic field around those lines (but more about these energy rings in the Wave Propagation section below) (see note 5). Inside the craft, over the top horizontal plane of the toroid, which
also forms the lower face of the radial planar guide, the induced
electrical charges react with the toroid’s magnetic field so as to form a
horizontally rotating field of polarized (positive) ions. This revolving
positive field reacts with the normal air outside the craft to initiate an
inflowing of polarized and neutrally charged air which, as soon as it
passes through the craft’s circumferential duct and over the toroid’s
electrically-charged outer edge, becomes positively ionized from the
effect of sharp-edge ionization This increase in the circumferential duct’s peripheral potential correspondingly increases the oppositely-charged potential of the fluid on the inside of the toroid (by way of the capacitive effect).
When the magnetic fields begin to resonate the flux lines will create
electrical eddy currents over the under-face of the floor surface, so that
a skin of charged particles will circulate around the surface (in
conjunction with the other circulating fields). The base can be
capacitively coupled (or directly coupled) to the upper outside dome-shell
of the craft so as to enable the metallic dome to acquire an outside
positive charge Bi-Polar Sphere-Sets The central rotating assembly is made up of four bi-polar sphere-sets
held equally spaced in a metallic plate or disc.
Holding the two spheres apart is a moulded insulating neck-frame (again smooth-curved) that also holds, with insulating arms, a rotating glass/quartz wheel which is smooth curved so as not to provide any current path to leak away charges (see note 7). The arm and wheel of each of the four bi-pole sphere-sets locates the whole central assembly within the toroid and the wheels allow it to turn along the inner concave wall so that the sphere-sets can be rotated about a vertical axis on an even plane. Accumulator Reactor Because the inner assembly of the base-disc and four sphere-sets, and its relationship to the inner concave-curved center of the toroid, can be likened to the plates and dielectrics of a capacitor, it can be seen that the electric charges distributed around it respond wholely to the movement of charges accumulated in, and around the outside perimeter of, the toroid. In fact, the whole craft behaves, moreover, as a multi-sectioned capacitor with multiple oppositely-charged interfaces (see fig.9 electronic circuit); whereupon, when a charge is increased or decreased at any one section all other sections will correspondingly undergo charge increases and decreases through the various interfaces. It is, by definition of its action, an accumulator reactor.
The four large lower spheres accumulate charge from the pointed inner bottom edge of the charging toroid, while the top small spheres attract to their surfaces electric charge from the pointed inner top edge of the toroid, although this effect is more enhanced as the central sphere assembly actually rotates, as explained below. The large spheres are used to feed electric energy into the small spheres. For, as in electrostatics if two spheres, one large and one small, are inter-connected by a conductive link (thin wire) or even a semi-conductor so that both spheres are at the same potential, then the intensity of charge on the small sphere will be much greater than that of the large sphere (ie density is inversely proportional to radius of curvature), and that if the larger sphere were negatively charged then the outer (upper) curve of the small sphere would correspondingly be negative, while the inner (lower) curve of the small sphere will be positive (or rather - less negative). These small-and-large-sphere sets follow the same principle, and it is for the same reason that the small spheres inside these ufos have been seen to glow intensely bright with energy. Another beauty of these configurations, particularly with the use of quartz, is that they don’t conduct their charges away - they accumulate it - and so there will always be an attractive force exerted between the diffuse charges of the toroid and these spheres (see note 8). With this established electrical relationship in mind the small-large sphere assemblies can more conveniently be termed bi-poles or bi-polar sphere-sets, simply to distinguish them as having different electrical configurations between top and bottom (as will be explained further below, neither sphere will be predominantly negatively or predominantly positively polarized). That these dielectric spheres are said to pulsate with light, of all colours of the rainbow, is indicative of the electrical energy of the atoms and molecules from the surrounding air being pummelled and stressed, to the point where electrons as they get thrown out of their normal energy orbits and jump in and out of higher bands exhibit all sorts of changes. This throwing off of coloured photons is only the visual effect of extreme ‘Fermi level’ energy-exchanges of when electrons are accelerated or decelerated. The higher the colour up the spectrum (ie blue-white) the more energy exchange that is being exhibited. A ufo will therefore glow red or orange at ‘low revs’ and progress through yellow, green and blue ‘through the gears’, to be ‘flat out’ pulsating a bright-white light – and it will cruise with a bluish-white haze around it (see note 9) (see Witnessed page)(see Explosion Almost page). By remarkable ingenuity the locating wheels rotate through an area of the inner wall of the toroid (ie the mid-section of the concave curve) which, electrostatically, has very little accumulation of charge anyway because of it’s hollow curvature, and which corresponds to the area of neutralisation of charge in the center of a fluid flow by Lorentz Forces. The base disc, as well as holding the four bi-poles, has to impede and
constrict the lower magnetic field of the toroid, so as to direct the flux
lines through, or mainly through, its central hole. This then, would not
be made of the same construction as the toroid shell, and would be made of
a non-magnetic metal such as an aluminium alloy – and perhaps even of the
exotic magnesium/bismuth layered combination found in the remnants of one
of the downed Roswell ufo’s (for some excellent investigative research on
this material see "Glimpses of Other Realities Volume 2" by Linda
Moulton Howe pp11). Interestingly, bismuth does have the sort of qualities
needed as it does exhibit what is called ‘lag current’ when pulsed
currents are applied to it at very low frequencies and in a strong
magnetic field (see note 10);
indicating that it has capacitance. Bismuth also has a high atomic mass,
and of course a Hall effect resistance or diamagnetism. Centralised Vortex
As will be seen below, this revolving cyclonetic field, or vortex (see Vortex page), will be further constricted and its power further amplified by additional electrical fields still yet to be set in motion around it, within the central chamber. But already, the congestion of magnetic flux lines and electric field lines, and the continual inflow of polarized and ionized air and particles – all of which are being drawn into this central chamber area is quite remarkable. It will be noted that, with all these energies pouring into the central
chamber there are only two ways out: Central to the action of a vortex, or cyclonetic field, is its ability to create a low pressure suction area. This it does by compacting its fluid into a much smaller volume than is 'normal' (see Vortex page). If its fluid (which in this case is air) takes up a certain volume of space and a vortex revolves that mass into a space 800 times smaller then air from further away will be drawn in to fill up that emptied space – hence the vacuum. Mostly a vortex is just a turning funnel which spurts out the bottom the densified air (or fluid) which upon ‘escaping’ normalizes again to a larger volume – and, in the case of air, with a higher pressure. So, below the center of a craft like this is created a high pressure zone – just like under a conventional aircraft’s wing. Further, a vortex has a centripital action, or convergence, where the densation and possibly pressure ionization* occurs, as the particles of the fluid are compressed together in an ever-more confining space. Densation in a vortex, if powerful enough, can alter the very balance of atomic structuring, to affect a compression of the interatomic spacing that intrinsically gives order to electron shells and energy bands. Densation is one of the very few ways of calling up the power of repulsion – which on an atomic level – is the most powerful force in the universe (*see note 12). A Vortex also performs a centrifugal action that separates very efficiently the electric charges of the atoms and molecules of its revolving fluid, be it air or liquid; the heavier particles (mainly positive) are left to slowly rotate around the mouth of the vortex while the thirty-thousand-times more agile negative electrons are whisked down the ever-constricting throat at infinite speed to establish a substantial potential difference between top and bottom (or outer and inner, respectively). As in a ‘black hole’ vortex while all and sundry is being swallowed down into ever-smaller ‘quanta’ both positive and neutral particles are actually being forced out of the mouth into the space around them. Cycloconstrictive Fields
As a result of the Foucault differential on the top spheres the inside (center-facing) curve would have a positive charge-difference and the outer a more negative potential. Complimentary to this arrangement is the charging process of the vortex, for when the central vortex is formed and it’s outer mouth-edge’s highly positive charge links with the inner center-facing sides of the top spheres an opposite potential (negative) will be induced on their outer sides as they rotate.
Wave Propagation Outside and below the craft the polarized electric charges that have been massing in the two concentric donut rings beneath the craft are primed and ready to conduct across the insulating air gap between them (the still air normally has a breakdown field strength of 3 x 106 Volts/metre), to form an electromagnetic wave that would shoot off into the air below – but they cannot conduct because of the strength of the magnetic fields from the toroid, which are keeping the two charges apart and, in fact, which are spinning both these electric fields around the outside shell of the toroid in the same direction (and forming a 'double shell' between the metal's surface and the surrounding air). I've actually seen this for myself - the metal skin of the 'ship I was underneath gave the impression of depth, not as just a two-dimensional flat surface; this thick surface shimmered as if it were energized, as if it were a vibrational material rather than a dead metal - as if its atoms were only loosely bonded. So I guess I was seeing the electro-energy that adheres so closely to the outside surface that its actually an integral part of a ufo.
The large masses of stored energy within each of the four cycloconstrictive fields of ionized particles (mainly protons and positive ions) now create a reverse-electromotive-force (back-emf against the toroid’s magnetic field) as these ‘plasmas’ force their way through the radial planar wave guide and out through the circumferential duct (with the internal reversal and change in electric pressures, between inside center and circumferential duct, the plasma of ionized atoms and molecules are then further accelerated outward because the ‘electrodes’ that make up the planar wave guide have become oppositely charged and so their convergent force, as mentioned above, is now divergent throughout the radial planar wave guide). In fact, the radial planar guide is the perfect configuration for a magnetohydrodynamic power generator, which would accelerate a plasma (see Plasma Wave page), because it has two planar electrodes (with a high potential difference between them) and a radial magnetic field, so that a current would be passed through the plasma perpendicular to the magnetic field, which, if no other forces were involved would transform the plasma into a transverse, rotating ring. By capacitive coupling and the reverse-electromotive-force the reversal of polarity in the diffuse layers around the toroid causes the toroid’s internal charges to reverse and the toroid’s magnetic field to momentarily collapse and reverse (which, depending on the capacitances and inductances surrounding the toroid will continue to reverse and collapse, to continually oscillate, in concert with the rest of the electrical reactions in the accumulator reactor - just as would a 'tuned circuit' (see note 15). [Note: As to the optimum frequency of that circuit's oscillation, it might be advantageous to correlate an established observation about ufos with a newly discovered gravitational technology. For amongst those who have observed ufos at close range and have reported (and in some cases have audio-recorded) a humming, whirling, or pulsing noise coming from them, some have indicated that such sounds had a frequency rate of between 2 to 8 pulses-per-second (or 2Hz - 8Hz), which seems to be the optimum frequency range which, when propagated at a certain power level into mass, renders it weightless (see Professor Aquino's "System G" anti-gravitation page) - or see note 15a for the website link...] The beauty of this system is that although the initial charges are generated by the toroid, strictly speaking they never actually leave the craft – the charges propagated in the electromagnetic wave are induced charges taken from the surrounding air. It doesn't expel its own energy - it expels the diffuse layers - not one ion of its own is lost... Plasma Propulsion Forces
| ||
 | ||
|
|
all pages copied from Paul E. Potters excellent website check out following website when next online for new updates
Check out Alien (UFO) Propulsion
